MAKLUMAT BAHAN/BARANGAN YANG DILULUSKAN
Keterangan Barangan : COMBINED OVERCURRENT AND EARTH FAULT RELAY
Kod Barangan : EE031201.ME120.A129
Nama Syarikat : DELAB SCIENTIFIC SDN BHD
Status Syarikat : PENGILANG
Alamat : NO. 22, JALAN TEMBAGA SD5/2D
52200 BANDAR SRI DAMANSARA WILAYAH PERSEKUTUAN KUALA LUMPUR
No. Telefon : 0362726506
No. Fax : 0362726915
Jenama : DELAB
No. Laporan : LAPORAN UJIAN SIRIM : 2015RE632
Tarikh Tamat : 15-06-2026
Rujukan : i) SAFETY STANDARD : IEC 60255-27:2013 (10.6.4.2 IMPULSE VOLTAGE WITHSTAND & CLAUSE 10.6.4.3 DIELECTRIC TEST) ii) EMC STANDARD : IEC 60255-26:2013 (CLAUSE 5.1, 7.2.3, 7.2.4, 7.2.5, 7.2.6, 7.2.7, 7.2.8, 7.2.10 & 7.2.11)
Catatan : i) COMMUNICATION INTERFACE : RS 485 (EXTERNAL MODULE IS REQUIRED); ii) COMMUNICATION PROTOCOL : MODBUS RTU (EXTERNAL MODULE IS REQUIRED); iii) COMMUNICATION DEVICE : PERSONAL COMPUTER (EXTERNAL MODULE IS REQUIRED); iv) REMOTE REAL TIME MONITORING AND MANAGEMENT SYSTEM : YES (EXTERNAL MODULE IS REQUIRED) v) AMBIENT TEMPERATURE : 0 °C TO 55 °C; vi) RELATIVE HUMIDITY : 93%; vii) DEGREE OF PROTECTION : IP 54 AT PANEL; viii) FAULT RECORD : YES; ix) EVENT RECORD : YES; x) BUILT-IN SELF-TEST/DIAGNOSTIC : YES (DEVICE FAILURE - DUF); xi) EXTERNAL ALARM CONTACT FOR PROTECTION RELAY FAILURE/DEFECT: YES; xii) OTHER(S) : LATEST FIRMWARE REVISION : 2.06
Negara : Malaysia


BilMODELPOWER SUPPLYMOUNTING TYPETIME DELAY SETTING RANGESCURRENT SETTING RANGES
1DP-3465 ~ 275 VAC, 45 ~ 65 Hz OR 90 ~ 300 VDC OVER CURRENT PROTECTIONa) LOW SET TIME DELAY SETTING (tp>): i) TMS FOR INVERSE TIME DELAY (TMS Ip>): 0.05 TO 1 ii) DELAY FOR DEFINITE TIME: 0.03 s TO 20 s ___________________________ b) HIGH SET TIME DELAY SETTING (tp>>): 0 s OR 0.02 s TO 0.5 s a) LOW SET OVER CURRENT SETTING (Ip>): 2% TO 200% OF In __________________________ b) HIGH SET OVER CURRENT SETTING (Ip>>): 20% TO 2000% OF In
2DP-3465 ~ 275 VAC, 45 ~ 65 Hz OR 90 ~ 300 VDCEARTH FAULT PROTECTIONa) LOW SET TIME DELAY SETTING (te>): i) TMS FOR INVERSE TIME DELAY (TMS Ie>): 0.05 TO 1 ii) DELAY FOR DEFINITE TIME: ___________________________ 0.03 s TO 20 s b) HIGH SET TIME DELAY SETTING (te>>): 0 s OR 0.02 s TO 0.5 sa) LOW SET EARTH FAULT SETTING (Ie>): 2% TO 100% OF In __________________________ b) HIGH SET EARTH FAULT SETTING (Ie>>): 20% TO 1000% OF In